Tag Archives: copper

More Work in Progress

The next steps in creating my art dolls depend on where and how the sculptures will ultimately be displayed. I have been working on both outdoor “garden dolls” and some new pedestal top pieces for gallery display.

A garden sculpture obviously needs to be constructed to withstand the elements, and live happily outdoors. The skeleton of the figure below titled “Tend” will be kneeling in a garden space tending to the plants around her. Her dress will consist of cast concrete that will fill up the chicken wire frame.

Skeleton form of garden doll "Tend"

Skeleton form of garden doll “Tend”

“Contemplate” is a gallery doll that is a reimagined version of an earlier piece titled “Driving in Reverse.” This steampunk styled doll has a padded wire skeleton and hand stitched clothing. A pair of boots and some additional mechanical elements will complete this piece.

Art doll "Contemplate" still under construction.

Art doll “Contemplate” thinking now about some shoes and accessories.

Next time… some finished pieces to look at.

 

 

 

 

Works in Progress

Travels during July kept studio time down a bit, so I thought I’d share shots of art dolls in progress this week.  I’m busy working on a couple of outdoor “garden dolls” for a fall show, and building gallery inventory back up from recent sales.

Each face starts as a disk of copper that I cut from 16 oz stock, flame anneal, and hammer into shape. Cutting, sanding and polishing bring each face to completion.

annealed copper disk with face outline

Annealed copper disk with face outline

Hammering face into shape

Hammering a face into shape

Copper face after shaping and polishing

Copper face after shaping and polishing

Eyes are fashioned from copper or brass headed fasteners onto which I torch fire powdered glass enamels.  By mixing opaque and transparent colors I can achieve an infinite variety of colors.

Hands I shape from copper tubing hammered and cut to form the sculpture’s wrist, palm, and four of the fingers.  Wire brazed into a notch cut on the side of the palm forms each thumb.

Close up of the hands of "Whee!"

Close up of the hands of “Whee!”

Next week I’ll share a few more bits and pieces.

Taking My Art Dolls on the Road

This is the week that me and my art dolls are traveling to our first doll show.  The “road” in this case is only taking us 30 minutes away to Durham, but even short travel requires planning. Since the vast majority of my creations end up on pedestals in the Hillsborough Gallery of Arts, I don’t often have to think about display and sales materials.

This weekend my gallery will be a table top. This limited space requires a bit of work. Of course the most important element will be the sculptures themselves.  Some of the art dolls I will be taking are already on display, so I will be pulling them for the weekend. I picked up Garden Girl II from the UNC Botanical Gardens gift shop where she has been one of several small sculptures of mine available. For my pieces currently still on their Hillsborough Gallery pedestals I’ve created tent cards with images to take their place when I remove them tomorrow..

Garden Girl II art doll and tent cards

Garden Girl II and tent cards for gallery

Some pieces require special hardware.  Three of my art dolls are hanging pieces with nowhere to hang them on a table. I solved this problem with a little time in my metal studio. I welded a little swing set type display for them to hang from. The challenge with this piece of hardware was to make sure it was strong and sturdy enough while still remaining relatively unobtrusive.

Display stand for hanging dolls

“Swing set” display stand for hanging dolls

Many other dolls have either custom stands I have constructed for them, or display blocks that they sit on.  Rounding out our travel preparation list will be sales materials, artist cards and promotional materials, information about the Hillsborough Gallery, and all my packing and transport stuff.

I think that I have everything together, but I may just check my list once or twice more.  As I wrote last week, if you would like to visit us on the road we will be at the R.O.S.E. International Doll Show Down East this Thursday through Sunday, June 18-22 at the Sheraton Imperial in Durham.

Art Dolls New, Old, and Visiting a Show

Here are the latest two art dolls to emerge from my studio this week.

art doll Mia

Mia

art doll mystic

Mystic

 

Mia is a throwback to an earlier piece titled Mimi. As with the earlier piece, Mia is a simple figure seated on the ground that I have had a bit of fun costuming.  Rich fabrics and “jewels” are contrasted with her very steampunk aluminum arms and copper neckline.

Mystic is a seated figure that started out in one direction, and ended up somewhere else as a result of the fabrics I chose.  Mystic also gained quite the collection of jewelry as it seemed almost necessary to match her fabulous copper shoes.

As I wrote about last week, these two new dolls, along with my entire collection of figures currently available for sale, will be attending the R.O.S.E. International Doll Show Down East – June 18-22 at the Sheraton Imperial in Durham.  This will be an interesting experience for me as it is both the first doll show I am bringing my work to, and it is mainly geared at an audience that collects/creates sculpted baby dolls.  My pieces may very well be the only art dolls there.  Only time will tell if that distinction will be good or bad, but the fact that a doll show was being held 30 minutes from home seemed to beg me to at least check it out. If you are in the area and want to check  it out, I’ll be at table #36 on the exhibit floor.

 

 

New Work, Shows, and the Concrete

This week I am turning my attention and energy into high gear getting ready for a couple of shows.  The first will take place in a couple of weeks in Durham NC.  It will be the first time I have attended an art doll show.  Even though most of the dolls  that will be in that show are not the type of figure sculpture art dolls that I create, it will still be interesting to see how they are received by a non-gallery audience.  It is also a very different display format than I am used to, so my mind is full of table display ideas and projects too,

That doesn’t mean that I haven’t been busy in the studio as well.  I have two dolls that I have just completed this week.  The first is simply named Lily.  She is seated and appears to be thinking about something. She has an expression as if she is just about to tell you something very interesting.

art doll Lily

Lily

The second doll is Garden 1.  She is the first of a series of indoor or outdoor art doll sculptures.  I cast her torso in concrete using a discarded beverage bottle for a form. I think she would look as great sitting within a flower bed, as on some indoor display space.

art doll Garden 1

Garden 1

Both will make their debut in Durham at the Down East Doll Show June 18-22.

Another Mask and a Bit of Concrete

I had started working on a second doll with an enameled mask even before the recent sale of her predecessor “Carnivale”.  Taking my hand hammered copper faces to a new place with the addition of torch fired enamel provides a multitude of new design and color options.

Mirro Mask art doll

Mirror Mask art doll

This doll, Mirror Mask, has an additional bit of intrigue for the viewer.  Where Carnivale was wearing her mask and only allowed a glimpse of her enameled eyes, Mirror Mask has pulled her mask slightly away from her face.  What the viewer glimpses behind is their own image in a mirror. With her hair piled high and bejeweled, and her peacock hued gown and walking stick, she’s obviously off to a very interesting ball.

The other piece I’ve been working on this week goes in a different direction.  While still technically an art doll, she will be one that can reside inside or out.  I have several shows coming up in the next few months, and at least one takes place in a garden setting.  I’ve decided to create some “garden dolls” for that show. the torso of the first is cast concrete utilizing a recycled plastic bottle for my form.  She is still curing in my outside workspace, so ill wait to share an image of her in my next post.

 

 

Stories

art doll driving in reverse

Driving in Reverse

“Driving in Reverse” is my piece for “It’s All About The Story”, the February feature show at the Hillsborough Gallery of Arts. The area in and around Hillsborough is home to a number of acclaimed authors, and we produce a collaborative show with one each year. This year we have teamed up with Jill McCorkle, and have created work based on her Going Away Shoes collection of short stories.

The story “Driving to the Moon” follows 30 years of connections and disconnections between two high school sweethearts, and the car that registered the miles along the way. The female main character is reminiscing while driving to visit one last time. The art doll “Driving in Reverse” is driving forward while keeping one eye in her rear view. She is keenly aware of the passage of time, and obviously has some things locked up inside.

“It’s All About The Story” runs from February 24th though March 23rd with opening reception on Friday, February 28th from 6-9pm, and an author reading and signing with Jill McCorkle on Sunday, March 2 from 2-4pm.

Whee!

Coasting down a hill, pigtails blown back, feet off the pedals.  That feeling of childhood freedom is what I was trying to capture with “Whee!” There is something charming and sculptural about the form of a bicycle itself that adds something to a piece like this.  I have a feeling that a few more such figures are in my future.

Whee!

Whee!

 

I knew that I wanted to create something different with my second bicycle piece, a challenge of Whee was to try to catch a moment of a figure in motion.  My first doll with a bike, simply titled “Bicycle” was a larger turn-of-the-century attired rider atop a vintage styled bike.  I’m not too sure, but I think that Whee is having just a bit more fun.

Bicycle

Bicycle