Tag Archives: figure

Back to the Gallery

My weekend forray to the land of re-born baby dolls was an interesting experience. I must admit that the ultra realistic baby dolls there were not my cup of tea, but there does seem to be a very dedicated group that practices the craft and/or collects the “babies” as they refer to them.  My sculptured art dolls were most definitely different from everything else there, and they did receive a very positive response from those walking around the exhibit floor.

Yesterday, several of my pieces returned to their usual venue, the Hillsborough Gallery of Arts.  They do look much more at home atop their pedestals than all grouped together on a table.  With a little visual room the viewer is allowed more time to take in all the details of each figure.

art doll Steam wall display

Steam wall display

I did take the time to do something different with the display of one of the returning dolls. In the gallery we have a room that we use to display member artists’ printed pieces like prints, note cards, books etc. Along the walls of this room, we have acrylic card holders that hold artist bio cards for visitors to help themselves. Above each card bin there is a bit of wall space where each of us can display one or two small works.

I usually hang a mixed media wall sculpture, but this month I decided to put one of my seated art dolls there. Steam looks pretty comfortable atop her shadow box display, and the interior of the box provides a great space to store the display block she usually perches on, and her information label.

Now it is time to get back into the studio and create a few more pieces for my featured artist show that opens at the end of July.  I’ll be sure to give you a sneak peek right here.

Go back

Your message has been sent

Warning
Warning
Warning
Warning

Warning.

New Work, Shows, and the Concrete

This week I am turning my attention and energy into high gear getting ready for a couple of shows.  The first will take place in a couple of weeks in Durham NC.  It will be the first time I have attended an art doll show.  Even though most of the dolls  that will be in that show are not the type of figure sculpture art dolls that I create, it will still be interesting to see how they are received by a non-gallery audience.  It is also a very different display format than I am used to, so my mind is full of table display ideas and projects too,

That doesn’t mean that I haven’t been busy in the studio as well.  I have two dolls that I have just completed this week.  The first is simply named Lily.  She is seated and appears to be thinking about something. She has an expression as if she is just about to tell you something very interesting.

art doll Lily

Lily

The second doll is Garden 1.  She is the first of a series of indoor or outdoor art doll sculptures.  I cast her torso in concrete using a discarded beverage bottle for a form. I think she would look as great sitting within a flower bed, as on some indoor display space.

art doll Garden 1

Garden 1

Both will make their debut in Durham at the Down East Doll Show June 18-22.

Go back

Your message has been sent

Warning
Warning
Warning
Warning

Warning.

Another Mask and a Bit of Concrete

I had started working on a second doll with an enameled mask even before the recent sale of her predecessor “Carnivale”.  Taking my hand hammered copper faces to a new place with the addition of torch fired enamel provides a multitude of new design and color options.

Mirro Mask art doll

Mirror Mask art doll

This doll, Mirror Mask, has an additional bit of intrigue for the viewer.  Where Carnivale was wearing her mask and only allowed a glimpse of her enameled eyes, Mirror Mask has pulled her mask slightly away from her face.  What the viewer glimpses behind is their own image in a mirror. With her hair piled high and bejeweled, and her peacock hued gown and walking stick, she’s obviously off to a very interesting ball.

The other piece I’ve been working on this week goes in a different direction.  While still technically an art doll, she will be one that can reside inside or out.  I have several shows coming up in the next few months, and at least one takes place in a garden setting.  I’ve decided to create some “garden dolls” for that show. the torso of the first is cast concrete utilizing a recycled plastic bottle for my form.  She is still curing in my outside workspace, so ill wait to share an image of her in my next post.

 

 

Posting and Sharing

art doll - Reading

Reading

I just finished setting up a Flickr feed as another place to share images of my art dolls.  Why? Like many artists I try to increase the exposure of my work to a wider audience.  Exactly the best way to do this online is a question I see raised often.  If I’m to believe the greatest portion of my blog comments and replies (spam) some people have Search Engine Optimization and web promotion all figured out, and they are only too happy to help you increase yours… for a fee, of course.

The fact that the landscape keeps changing, and what worked last year no longer does, makes it even more challenging.  Anyone with a separate Facebook fan page for their work knows that now even those who had taken the time to “like” your page probably don’t see your posts on their news feed.  You have to pay to “boost” your posts, or run ads for that to happen.  I got another such surprise when I went to add a new image to my Fine Art America page last week.  As a 3D artists I never had any reason to use their paid service to sell prints or canvases of my work.  Recently, they limited the number of images that free users could have to 25.  I have about four times that already.  I’d have to sit and delete 75+ one at a time to add just one new piece of work.  You can upgrade to a premium account to address the issue. Needless to say, don’t check there for my new work.

Hopefully, some of the new things I’ve added like Pinterest boards and a Flickr stream, or that I’ve done like changing the way I name and tag images will help.  There are some things I’m still researching like coordinated Instagram and Twitter usage. Others, like opening an Etsy shop, I just don’t think are for me.

Right here where you are on my blog will remain the best way to keep up with what I’m working on, like “Reading” that I photographed earlier today.  If you’re an artist friend, share what you do or are trying to get your work out. I’d love to hear.

Photographing a Moving Doll

art doll cirque 2

Cirque II

“Cirque II” is my latest art doll figure.  Like my original “Cirque” she is a fanciful aerial silks acrobat. I enjoy occasionally creating dolls like these that hang rather than sit or stand on a base.  They allow for movement to enter into the design.  Properly balanced and positioned, a doll like Cirque II can catch the slightest bit of air movement and dance or spin.

I like how this adds another dimension of interest to the piece.  It also allows for greater flexibility in display. However, it does provide a unique challenge in the area of photography.  Obtaining that crisp and clear photograph of a sculpture that is moving, no matter how slowly, can be vexing.

Thankfully, the dolls are not very large, or heavy. The addition of a couple more strands of mono-filament at strategic locations to tether her in a fixed position seems to be the answer.  Trying to give the illusion that she is still moving while she is not was the goal.

Here is a shot of her predecessor…

art doll cirque

Cirque

Thinking Inside The Box

In my last post I mentioned that creating a piece for a theme can sometimes prove more of a challenge than expected. Each year we host two themed shows to start off the calendar at the Hillsborough Gallery of Arts. This year’s January show is titled 22 Squared. We installed this show yesterday morning, and there are as many interpretations of that title as there are artists in the gallery.

Now, you’d think that such a non-specific open-to-interpretation title would be easy to create for. But I was stumped. Most of my current work consists of art doll figure sculptures. I didn’t want to just create a doll, and put her into some contortionist pose, place her in or on a frame, or balancing on a box. Nothing stuck me.

Instead, I decided to take a step back, and think on the square. For a 3D artist this would mean a box. So I started by creating a wooden shadow box. Next, came a glass front for the box. Instead of a simple sheet of glass, I pulled out my stained glass stash and made a somewhat steampunk looking front.

For the interior, I thought on boxes themselves. What do we use them for? We use them to carry, to hold, to protect, to hide, or to contain. The box that I had made looked like it would protect something valuable, but also obscure and hide a bit of the contents. The steampunk flavor of the glass front lead me to a clockwork heart. We certainly try to protect and shield our hearts. This mechanical pacemaker needed someone to tend and maintain it. I recycled a simple figure from a previous piece to wind this delicate time piece and become The Clock Keeper. The interior was made complete with the addition of an antique looking paper with a pattern of watch faces that I applied to the back before installing the contents.

The Clock Keeper

The Clock Keeper

22 squared will be on display at the Hillsborough Gallery of Arts from January 27th to February 23rd. The opening reception is this Friday the 31st from 6-9 pm.

Delight in the Details

As I was sewing a pair of lace up boots for a new art doll sculpture, I was thinking to myself that these little details are part of what makes these pieces so intriguing.  Since that doll isn’t quite finished, I figured that I’d share a few examples from some earlier dolls.

“Janice” sits and strums a guitar fashioned from copper, aluminum, a spoon handle, wire and beads.

spoon handled guitar and hands from Janice doll

spoon handled guitar and hands from Janice doll

“Janice” also sports a nifty pair of high top sneakers.

Janice's sneaker

Janice’s sneaker

For “Garden Girl #2” I created a small copper garden basket, and a teeny, tiny, trowel.

Garden Girl 2 holds basket and trowel in her leather garden gloves

Garden Girl 2 holds basket and trowel in her leather garden gloves

“Time Keeper” has boots made at my metal work table out of copper tubing.

Time Keeper's copper boots

Time Keeper’s copper boots

The front of “Snow Queen” shows her lace up bodice, leather mittens, and beaded ice scepter.

 

front of Snow Queen

front of Snow Queen

And just in case you need one more pair of tiny shoes… Here is a close up of “Lacing” tying up the ribbons on one of her toe shoes.

 

Lacing shoe detail

Lacing shoe detail