Tag Archives: figure

Art Doll Motorcycle III

More Parts and Pieces

The little motorcycle sculpture is now ready for its art doll riders.  This past week I added all the remaining parts and pieces that a motorcycle enthusiast would expect to find.  The art doll riders will sit on their padded “leather” seat and grip copper, hardware, and polymer clay handlebars. The addition of a button shaped brad gas cap, knee guards, tank rondel, a glass gem headlight, and brass brad gauges complete this miniature steampunk machine.

steampunk mixed media motorcycle sculpture ready for art doll riders

motorcycle is ready for art doll riders

Now the Riders

As with most of my art dolls, the riders will start in my metal studio where I will hammer out their faces from a circle of copper stock. They are on the bench awaiting some sanding and polishing. In the meantime, I got started on twisting together the dolls’ wire skeletons.   Here you see the beginning of the driver sitting on the cycle.

wire frame of driver on cycle

wire frame of driver

Last Chance to See Art Dolls

art doll Media at HGA

Three of my art doll pieces in “Our Art Is…”

This is the last weekend for my featured artist show, “Our Art Is…“, with painters Eduardo Lapetina and Pat Merriman at the Hillsborough Gallery of Arts.  The show runs through Sunday.  It has been a fun show with lots of wonderful feedback. Several of the dolls will be making their way to their new homes when the next featured artist show installs on Monday.

Go back

Your message has been sent

 

Art Doll Motorcycle II

Last week I shared WIP (work in progress) images of my current art doll sculpture.  The motorcycle for the sculpture is almost ready for its riders.  Here are a few more images of the motorcycle as it came together.

Parts and Pieces

Art doll motorcycle gains gas tank and motor

More parts added to art doll motorcycle

Here the frame gains a gas tank, engine block and some exhaust pipes.  I like the play of the different materials for each part. I enjoy the way it helps each part to pop more than if I fashioned the whole sculpture from copper.

Art doll motorcycle ready to get a concrete base

. Ready to gain a base

Next the tiny cycle gained some aluminum wheels with wooden hubs, and some copper handlebars. After a bit of grinding and cleaning the wheels were wired and attached to some hardware cloth for setting in a concrete base.  This will both anchor the piece firmly in its base, and provide reinforcement for the concrete.

Art doll motorcycle set in concrete base

Cycle curing in concrete base

Now some waiting for the base to dry and cure.  Next the piece will come inside for addition of details like a stitched seat, handle bar grips, headlight, gauges, gas cap …

This is a piece that is most definitely a collection of details. I can’t wait to get started on the riders.

Say hi and let me know what you think

Go back

Your message has been sent

Art Doll Motorcycle

I recently started working on a piece with two of my art doll figures having an adventurous ride on a motorcycle.  Though I’ve created a number of art dolls and figure sculptures that were perched on bicycles, this is my first riding a motorcycle.

I have been having fun so far researching and sketching the particular type of motorcycle, and then stylizing it into my steampunk interpretation.  There are a obviously a few more components than a bicycle to incorporate in to ensure it represents one particular type of machine over another.

First I braised together the basic motorcycle frame and produced a couple of types of wheel choices.

beginning copper frame for doll sized motorcycle and wheels of electrical conduit

Beginning of fame and conduit wheels

The most labor intensive process so far has been hand hammering out the two fenders.  Blacksmith and body shops have power hammers and english wheels to shape and smooth these types of parts. I found myself wishing I could find a Tinkerbell sized version of both to work with for these.

hammering copper fender for art doll sized motorcycle

Hammering out front fender

I added the fenders, wheel mounts, and springs. Next up will be handlebars, motor, and gas tank. I’ll do my best to take photos along the way.

copper cycle frame with fenders and springs

Frame with fenders and springs

Go back

Your message has been sent

 

 

 

Art Dolls Installed and Invitation

Our Art Is…

The new show at the Hillsborough Gallery of Arts including my newest art doll figures is now installed.  This show that features my sculptures along with the paintings of Eduardo Lapetina and Pat Merriman will run through June 21st.  The opening reception is this Friday, May 29th, from 6 to 9pm during Hillsborough’s monthly Last Friday celebration.  If you are in the area I hope you can join us, and see our new work. Here is a peek into the feature gallery.

HGA gallery view

View through door of Featured Exhibit gallery at HGA

A Closer Look

If you regularly read my posts you have seen most of these new art dolls in their studio shots, but here is a bit more of a tease from the gallery installation.

art doll Psyche-Delia with steampunk guitar

Psyche-Delia

Psyche-Delia is a steampunk rocker.

 

art doll Media at HGA

The art doll Media holds a key to…?

Art dolls: Media, Getting Ready, and Psyche- Delia sit atop a trio of pedestals.

art doll Joy

Joy

Joy dances in a dress that looks like it may have been pulled from Eduardo’s palette.

art dolls: Doll with Doll and Spring in Hillsborough Gallery of Arts

Doll with Doll (sold) looks up at viewer

Doll with doll, and figure titled, “Spring” in front of another Eduardo Lapetina piece in the background.

Art doll Paper Alice

“Paper Alice” art doll with Alice in Wonderland paintings.

It was completely serendipitous that Pat Merman had produced two mixed media Alice in Wonderland themed paintings that flank my art doll Paper Alice.  Paper Alice has paperclay sculpted head and hands, and parchment locks.

art doll Current drift in her boat

Current Drift floats on a pedestal

Hope that you can stop by and see these and my other new art dolls in the feature show, as well as, other examples of my sculptures throughout the Hillsborough Gallery of Arts.

Go back

Your message has been sent

 

 

Art Doll Excursion

Getting Ready for Feature Show

I am busy finishing up the art doll figures that will be part of my feature show opening next week at the Hillsborough Gallery of Arts.  Each year as I put together this body of work, connections between individual pieces emerge.  The pieces I have created this year push gesture, narrative and incorporation of materials.  My latest, Mechanical Succession, checks all of those boxes, and is a bit of a stretch beyond the others.

figurative art doll titled Mechanical Succession, experimentation in mixed media

Mechanical Succession

I created her on a slightly larger scale than most, and obviously opened up every tool kit and materials bin in my studio in making her.  There are still a few tweaks in positioning and perhaps a random detail or two left to add.  She is definitely on of those pieces I spoke of in an earlier post that you need to take a break from while you are working in order digest what you have done so far.

Go Where the Art Doll Takes You

I have to be completely honest and say I’m not sure myself what I think of her yet. Some pieces go exactly where you want them to, while others take you on their own excursion instead.  I feel that Mechanical Succession is one of the latter.  I am guessing that the story that she jumped out of must be an interesting one, though I’m not quite sure if it is some magical fairy tale, or one that cautions us about the future.

Next week I will share some images of the show installation, and provide one last reminder to set aside next Friday from 6-9 to come out to the opening, see it in person, and say hello.

Go back

Your message has been sent

Art Dolls and Photo Angles

Today I took some photographs of my newly completed art doll sculpture titled Current Drift.

art doll Current Drift reclines in her small wooden boat

Current Drift

This figure sculpture is another piece that will be at the Hillsborough Gallery of Arts starting May 25th.

Making This Art Doll

This piece did not begin as a preconceived sketch, but with a simple decision being made while in the metal studio creating hands and face.  That choice was to leave her eyes closed. As I took the polishing buff to the blackened and hammered piece of copper a very peaceful visage emerged.  The question then arose as what this figure was enjoying. Was she listening to beautiful music, basking in the warmth of the sun, or perhaps even a fairy tail princess awaiting an awakening kiss?  In the end, I thought she’d enjoy a gentile ride.

Though not intentional, I feel that she fits in with my earlier pieces Driving in Reverse, and Future Thoughts.  Like those two earlier figures, this doll seems to be communicating something to the viewer. Also, as with those earlier art dolls, her title conveys both her action, and her attitude.

Photographing and Finishing

Taking images of Current Drift was an interesting challenge.  Unlike a figure seated or standing, getting all the elements of this art doll in a single shot requires shooting from above.  I find that when you do that the piece tends to seem flattened.  It took quite a bit of camera angle and art doll repositioning until I landed on one that I thought worked as well as possible.  Even with all that movement I haven’t settled if this piece is completely complete.  I have been toying with the idea of imbedding the whole piece, art doll and boat, in a puddle of clear or slightly blue tinted resin.  I guess you might just have to show up to the show to find out.

Go back

Your message has been sent

Mixed Media Art Doll

An Art Doll That Plays With Materials

Anyone familiar with my work knows that I love to mix, match, and experiment with the media I use in my sculptures.  My newest art doll, Media, takes that materials exploration to its highest power.

mixed media art doll "Media"

Media

She has a hammered copper face on a  paperclay head with parchment hair and torch fired glass enamel eyes.  Her shaped wooden torso connects to one paperclay arm, and one fabricated from copper and aluminum conduit.  One jointed leg I fashioned from copper tubing and a shaped dowel shin, and the other has a dowel thigh joined with a copper and aluminum shin.  Finally, she is clad in a copper hat, hand stitched faux-leather boots, a tulle skirt, fabric sleeve, and a bit of metallic paint tattooing on the side of her head.

It would be an understatement to say that I enjoyed creating this art doll. The final effect is both playful and somewhat edgy and mysterious.  I’m not sure what story she has to tell, but I am guessing that it is one that must be unlocked from safe keeping first.

Media will join my other new art doll figure sculptures at the Hillsborough Gallery of Arts May 25th through June 21st.

Go back

Your message has been sent

Paper Art Doll

Art Doll in Progress

Last week I shared some Work-In-Progress images of the newest art doll I was working on. This figure was inspired by a combination of my very first art doll, a snow day, and our yearly literary themed show.

Rather than playing with the idea of a rag doll that wasn’t quite floppy, I instead twisted the idea of a paper doll into a three dimensional figure.  This idea sprung from my picking up paperclay to incorporate into my pieces after having used polymer clay for a face on a snowy day.  Thinking of this figure as a 3D paper doll turned my attention to book illustrations. The images in a classic version of Alice In Wonderland became the literary basis for “Paper Alice.”

Full length image of Paper Alice

Paper Alice

I purposely kept Alice’s color palette muted and almost monochromatic.  I wanted the figure itself to feel as though she had been plucked off the pages of an aged volume.  I used mages and quotes from the text to further this concept.

Metalwork takes a supporting role in this art doll. Her shoes, dress collar, and headband I fashioned from copper.  The “drink me” tag on her bottle is tooled brass foil, and her eyes are torch fired glass enamel on a copper base.

detail of Paper Alice

detail of Paper Alice

I used an antique yellow parchment paper to create Paper Alice’s hair.  I created this wig by hand cutting sets of strips that were then stitched on to a tiny stocking cap I created for her. A bit of curling on the edge of scissors set her coiffure in motion.

Paper Alice hands

Paper Alice hands

I enjoyed experimenting with new materials and techniques with this art doll.  I expect that I will incorporate them in other figure sculptures in the not too distant future.

Go back

Your message has been sent

Art Doll with a Doll, and a WIP

Art Doll with a Doll

This week I completed Art Doll with a Doll. This piece reminded me that once you finish a piece she then belongs to the viewer.

seated art doll figure of doll with doll

Art Doll with Doll

The reason I say this, is that I posted her image on some of my social media sites, and almost instantly received a message to purchase the “mother and baby” piece.  I have to admit it took me second to realize that the writer, a soon to be grandparent, meant the doll I had just posted. This pair is now reserved for that viewer, but she will first appear in my gallery feature show in May with a red dot on her label.

Work In Progress (WIP)

Creating for a gallery show, I always like to push myself to stretch a bit.  My recent experimentation with a polymer clay face for my doll “Snow Day”, intrigued me.  I purchased a package of paperclay.  I have been wanting to try this air dry clay on an art doll for a while now. I will be working metal into the final composition of this piece , but her beginning is a bit different from my usual forged copper face and hands. The rest of the body construction for this art doll will follow my same form of a wire skeleton with padding and clothes sewn on.

paperclay head

paperclay head

paperclay2

head and hands drying

I chose paperclay after thinking about my first figure sculpture to cross into the art doll realm, No Rag Doll.  That doll as you may recall was a stuffed doll with a wire skeleton and a brass foil sculpted face. With her inner support to hold herself upright, she was a rag doll that wasn’t floppy at all. In using paperclay I am playing with the idea of a paper doll, but since she is rendered in three dimensions she is nothing like the flat counterparts from which I am drawing inspiration.  Her connection to paper also stems from a literary catalyst, but I’ll share more about that when I post her completed images.

Go back

Your message has been sent

 

 

 

Art Doll Getting Ready

Where is this art doll off to?

This week I completed “Getting Ready”.  This art doll is obviously on her way to somewhere very important, but not quite set to go.  I’m sure she’d like to have her dress ready too, but her undergarments are pretty interesting all on their own.  Besides, her attention seems to be firmly concentrated on her hair at the moment.

seated figure sculpture art doll Getting Ready

Getting Ready

I may change the mirror she is holding a bit.  It is one of those details that you need to look at before you feel it is exactly what you want for a piece.  Sometimes time and distance are the most useful items you have in your toolbox.  I can’t even recall the number of pieces I’ve changed or even completely reworked before they appeared in the gallery.  A couple of the dolls that will appear in my feature show in May are very different beings now compared to what they were a few months earlier.

Back view of Getting Ready

back view of Getting Ready

As you can see, Getting Ready is tightly laced up, and even has a little bit of boost for her bustle. I worked more metal through her shoulders and bust line and defined her waist with soft sculpting techniques. These shapes are created through costuming with most of my other art dolls.

I’m still left wondering where she and her striped stockings are off to next.

Go back

Your message has been sent